Superior Performance Intelligent controlled Cabinet Style
Wet-membrane Humidifier industrial humidifier
Working Principle
Wet film humidifier using the water evaporation, the water was
constantly sent to the upper part of the wet film through the water
pump and the dispenser.
Under the action of gravity, the water goes through the wet film
back to the main tank to form a circulating process. When the air
goes through the wet film with its full contact, the dust and other
particulate matters are filtered. Thus, the air is purified, and
the humidity increases. In this way, it achieves the purpose of
humidification, purification, and dust-suppression.
Clean tap water or chilled water through a water inlet pipe to the
wet film humidifier lower circulation water tank, the water enters
the water tank is composed of float valve and liquid level switch
to control. The water in the water tank by a water pump to wet film
on top of the water distributor, through wet membrane water
distributor will be uniform water distribution, water under the
action of gravity along the wet membrane surface flow down the wet
film, wetting, penetrating, when the air through the wet film
during its increased humidity, temperature drop, another part
without evaporation water from the humidifier bottom back to the
water tank; the water in the water tank through a circulating water
pump using repeated cycles, the wet film humidification of air. In
this way, to achieve the purpose of saving water. When the
circulating water level in the water tank of water drop, switch to
open, to ensure water tank, the water level of the water tank is
maintained at a set height range; when the circulation of the water
level in the tank falls to a certain height, the water tank of the
low water level switch, ensure the circulating pump in the absence
of water stop. In the process of temperature and membrane water
evaporated part, but does not consume additional energy.
Main Features
- Humidification clean without whitening phenomenon; inner main tank
with circulating water detection and water storage memory; timing
automatic water changing.
- Can be remotely controlled
- Power saving, power consumption is only 20% of the electrode
humidifier
- Free from air conditioning system operation restrictions,
automatically humidification according to indoor conditions.
- When the indoor temperature is high, Has a good cooling effect.
- Humidification saturation rate up to 90%
Technical Parameters
| Model No. | Spraying Volume. | Power | Tank Capacity | Circulation Air volume | Coverage Area |
| UY-M06 | 6L/h | 180W | 55L | 2500m³/h | 10-80㎡ |
| UY-M12 | 12L/h | 330W | 55L | 5000m³/h | 80-150㎡ |
| UY-M20 | 20L/h | 330W | 75L | 5000m³/h | 150-200㎡ |
| UY-M30 | 30L/h | 480W | 75L | 7500m³/h | 200-300㎡ |
| UY-M OEM | Can be equipped with the remote control, data upload, improve the
moisture content of the product |
Main Applications:
- Semiconductor plant, electronics factory, communications room,
computer room, SMT workshop
- Museums, archives, commercial buildings, theaters, conference rooms
Superior Performance Intelligent controlled Cabinet Style
Wet-membrane Humidifier industrial humidifier
Superior Performance Intelligent controlled Cabinet Style
Wet-membrane Humidifier industrial humidifier
Ucloud Dry fog humidifier UC-03
ntelligent precise humidity control
At Qingdao Ucloud Fog, you’ll find a range of humidification
systems that are suited to a variety of
different environments and applications. Whether you need a
commercial humidifier, industrial humidifier,
wine cellar humidifier or any other humidification system, Smart
Fog will engineer a solution to fit your
exact needs.
4_Direction Compressed-air & water Spray humidifier 11L/H Dry Fog
Humidifier
